Pekerjaan Struktur Pusat Oleh-oleh di Bawen, Kabupaten Semarang

Konvensi Gulo, Dimas Bayu Pamungkas, Abdullah Abdullah

Abstract


This study analyzes the structural work on a souvenir center construction project in Bawen, Semarang Regency. The primary focus of this research is the superstructure and foundation construction methods, material and workmanship quality control, identification of field problems, and the implemented action plan. The scope of work includes footing foundations, steel columns, steel beams, and floor slabs. The analysis includes the use of equipment, materials, and the implementation of K3. Effective coordination, selection of appropriate work methods, and consistent quality control were found to be crucial to the project's success, particularly in addressing challenges such as sloping land and K3 standards

Full Text:

PDF PDF

References


ACI Committee 318. (2014). Building code requirements for structural concrete (ACI 318-14) and commentary. American Concrete Institute.

Bowles, J. E. (1997). Foundation analysis and design (5th ed.). McGraw-Hill.

Budiman, A., & Santosa, H. (2017). Analisis Produktivitas Pembengkokan Baja Tulangan pada Proyek Konstruksi. Jurnal Teknik Sipil, XX(Y), ZZ-YY.

CEN. (2005). Eurocode 3: Design of steel structures – Part 1-1: General rules and rules for buildings. European Committee for Standardization.

Gambhir, M. L. (2004). Concrete technology. McGraw-Hill Education.

Ghilani, C. D., & Wolf, P. R. (2017). Elementary surveying: An introduction to geomatics (14th ed.). Pearson.

Halpin, D. W., & Woodhead, R. W. (1998). Construction management (2nd ed.). John Wiley & Sons.

Haslam, R. A., Hide, S. A., Gibb, A. G. F., Ghasemi, F. A., Kamard, D., & Anderson, E. (2005). Contributing factors to construction accidents. Construction Management and Economics, 23(6), 639-648.

Hurd, M. K. (2011). Formwork for concrete (7th ed.). American Concrete Institute.

International Labour Office (ILO). (2006). Safety and health in construction. International Labour Office.

Kerzner, H. (2017). Project management: A systems approach to planning, scheduling, and controlling (12th ed.). John Wiley & Sons.

McCormac, J. C., & Brown, R. H. (2014). Structural steel design (5th ed.). Pearson.

Mehta, P. K., & Monteiro, P. J. M. (2014). Concrete: Microstructure, properties, and materials (4th ed.). McGraw-Hill Education.

Neville, A. M., & Brooks, J. J. (2010). Concrete technology (2nd ed.). Pearson Education.

Peck, R. B. (1969). Deep excavations and tunneling in soft ground. Proceedings of the Seventh International Conference on Soil Mechanics and Foundation Engineering, State-of-the-Art Volume, 225-290.

Project Management Institute (PMI). (2017). A guide to the Project Management Body of Knowledge (PMBOK® Guide) (6th ed.). Project Management Institute.

Popovics, S. (2004). Concrete materials: Properties, specifications and testing. William Andrew.

Puspasari, P., & Rosyid, A. (2018). Analisis Hubungan Kerja Antar Pihak Proyek Dalam Meningkatkan Efisiensi Waktu dan Biaya Konstruksi. Jurnal Rekayasa Sipil, XX(Y), ZZ-YY.

Putra, R. I., & Santoso, A. B. (2019). Analisis Efisiensi Penggunaan Mesin Molen Beton Pada Pekerjaan Pengecoran. Jurnal Teknologi Sipil, XX(Y), ZZ-YY.

Salmon, C. G., & Johnson, J. E. (2008). Steel structures: Design and behavior (5th ed.). Pearson Prentice Hall.

Shapira, A., & Even-Tzur, E. (2007). Content analysis of crane accident reports: comparison of two countries. Journal of Construction Engineering and Management, 133(10), 755-764.

Wang, C. K., & Salmon, C. G. (2019). Reinforced concrete design (9th ed.). Pearson Education.




DOI: https://doi.org/10.61689/jti.v2i2.962

Article Metrics

Abstract view : 0 times
PDF - 0 times PDF - 0 times

Refbacks

  • There are currently no refbacks.


Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 International License.

Jurnal Teknik Indonesia by Fakultas Teknik Undaris is licensed under Creative Commons Attribution 4.0 International